The date of payment from buyers deliver within days
By certification [File Integrity]
Automatic Cap Sealing Machine
The equipment is widely used to the cap sealing of 18L / 20L chemical cans, paint buckets and steel pails, which has 4 types, single-head, double-head, three-head and four-head.
This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.
Single-head Automatic Cap Sealing Machine
16 sets/ min
Double-head Automatic Cap Sealing Machine
28 sets/ min
Three-head Automatic Cap Sealing Machine
42 sets/ min
Four-head Automatic Cap Sealing Machine
length*width * height
We can provide the raw materials for our clients.
We can provide the original accessories in factory price.
The brand of the electric components we use is Schneider.
All the pneumatic components we use are from AirTAC.
The equipment can reduce workers’ workloads, and help workers improve work efficiency.
The equipment is easily operated, and can control the length of the rubber strip accurately.
● We provide free technical service about the machine and application issues.
● Free on-site touring and introduction of our factory.
● We provide process design and validation for free.
● We can guarantee on-time delivery of samples and goods.
● Close follow-up of all orders by special person and keep customers informed timely.
● All after-sale request will be responded in 24 hours.
Faults & Methods:
Fault 1: The feeding cylinder can’t go back.
Cause: Its end-point or all parts of it induce the signal unsuccessfully.
Methods: Please check the small cylinder’s induction which can screw down & lift up in the pushing part;
Please check the end-point induction of the pushing cylinder.
Fault 2: The belt of the operating platform can’t work.
Causes: The bottom of the blanking equipment is blocked;
The lower bar induces the signal unsuccessfully;
The blanking clip doesn’t work;
The small cylinders is damaged;
The torsional spring in the blanking clip is damaged.
Methods: Please dredge the blanking equipment;
Please adjust the stop-point magnetic induction under the cylinder, till the light is on;
Change the small cylinder;
Change the torsional spring in the blanking clip;
Adjust the belt of the operating platform.